Variability in life expectancy among people with HIV in Brazil by gender and sexual orientation

Abstract Introduction In Brazil, though Antiretroviral Therapy (ART) is available to all, the benefits may not be experienced uniformly. We projected Life Expectancy (LE) for People Living with HIV (PLHIV) in care as currently observed and estimated the impact of guideline-concordant care. Methods Using a microsimulation model, we projected LE for a cohort of PLHIV and for four population groups: cisgender Men who have Sex with Men (MSM), cisgender Men who have Sex with Women (MSW), Cisgender Women (CGW), and Transgender Women (TGW). Cohort data from Evandro Chagas National Institute of Infectious Diseases/Oswaldo Cruz Foundation (INI/Fiocruz) informed model parameters. We modeled five scenarios: 1) Current care: ART initiation, adherence, and retention in care as currently observed, 2) Guideline-concordant care: immediate ART initiation, full adherence to treatment, and consistent retention in care, 3) Immediate ART initiation with observed adherence to treatment and retention in care, 4) Full adherence to treatment with observed timing of ART initiation and retention in care, and 5) Consistent retention in care with observed timing of ART initiation and adherence. Results With current care, LE from age 15 would be 45.9, 44.4, 54.2, and 42.3 years, for MSM, MSW, CGW, and TGW. With guideline-concordant care, LE would be 54.2, 54.4, 63.1, and 53.2 years, for MSM, MSW, CGW and TGW, with TGW experiencing the greatest potential increase in LE (10.9 years). When investigating the components of care separately, MSW and CGW would gain most LE with immediate ART initiation, whereas for MSM and TGW consistent retention in care would be most impactful. Conclusions In settings like INI/Fiocruz, MSW and CGW would benefit most from interventions focused on earlier diagnosis and linkage to care, whereas TGW and MSM would benefit from interventions to sustain engagement in care. Assessment of the HIV care continuum for specific populations should inform care priorities.

Relação entre fatores socioeconômicos e a pandemia da covid-19 / Correlation between socioeconomic factors and the COVID-19 pandemic

Resumo Este artigo objetivou verificar a relação entre os fatores socioeconômicos e a pandemia da covid-19 nos municípios de médio porte mineiros. O procedimento de análise de dados foi a modelagem de equações estruturais de mínimos quadrados parciais. As variáveis utilizadas foram vulnerabilidade, saneamento, renda, agravantes, vacinação, casos de covid-19, mortalidade por covid-19, hospitalização e doenças crônicas não transmissíveis. Os dados foram coletados no Índice Mineiro de Responsabilidade Social, no painel de monitoramento dos casos de covid-19 e no painel de monitoramento de vacinação contra covid-19. O recorte temporal foi determinado pelo início da pandemia e a disponibilidade de dados (março de 2020 a setembro de 2021). Os resultados evidenciaram que melhores condições de saneamento estão negativamente relacionadas aos casos de covid-19, a renda está positivamente relacionada com os casos de covid-19 e a taxa de mortalidade por doenças crônicas não transmissíveis está relacionada de forma positiva com a mortalidade por covid-19. Os casos de covid-19 têm impacto negativo na hospitalização e a hospitalização tem impacto positivo na mortalidade. Os casos moderados pela vacinação estão negativamente relacionados à mortalidade por covid-19. Os resultados confirmam que condições socioeconômicas menos favoráveis tornam a sociedade mais vulnerável a covid-19.

Abstract This study investigated the correlation between socioeconomic factors and the COVID-19 pandemic in medium-sized Minas Gerais municipalities. Data were analyzed by partial least squares structural equation modeling, using the following variables: vulnerability, sanitation, income, aggravating factors, vaccination, COVID-19 cases, COVID-19 mortality, hospitalization and non-communicable chronic diseases. Data were obtained from the Minas Gerais Social Responsibility Index, the COVID-19 cases monitoring panel and the COVID-19 vaccination monitoring panel. Data collection time frame was determined by the onset of the pandemic and data availability (March 2020 to September 2021). Results showed that better sanitation conditions are negatively related to COVID-19 cases, income is positively related to COVID-19 cases, and higher mortality from chronic noncommunicable diseases are positively related to COVID-19 mortality. COVID-19 cases have a negative impact on hospitalization and hospitalization has a positive impact on mortality. Cases, moderated by vaccination, are negatively related to COVID-19 mortality. These findings confirm that less favorable socioeconomic conditions make society more vulnerable to COVID-19.

Revisión histórica, distribución potencial y estado de conservación de la rata endémica de México Xenomys nelsoni (Rodentia: Cricetidae) / Historical review, potential distribution, and conservation of the Mexican endemic rat Xenomys nelsoni (Rodentia: Cricetidae)

Resumen Introducción: La Rata de Magdalena, Xenomys nelsoni, es un roedor endémico de México, de distribución restringida a las selvas bajas caducifolias densas, en una pequeña región de la costa del Pacífico mexicano. Es una especie poco conocida, catalogada como "En Peligro" de acuerdo con la Unión Internacional para la Conservación de la Naturaleza (IUCN). Este desconocimiento unido a la alta tasa de deforestación de su hábitat hace que su conservación sea prioritaria. Objetivo: Realizar un recuento histórico de los registros depositados en las colecciones científicas, generar mapas de distribución potencial y analizar el estado de conservación de la especie. Método: Los datos de ocurrencia de las especies se obtuvieron de la literatura y bases de datos digitales y se analizaron por décadas. Se utilizaron los programas GARP y MaxEnt para generar los modelos de nicho ecológico. La importancia de las variables en el modelo se estimó mediante un análisis Jackknife. Resultados: A lo largo de 129 años 19 recolectores registraron 69 ejemplares, de los cuales 65 están depositados en siete colecciones internacionales y una nacional. Aunque la especie sólo se ha recolectado en Jalisco y Colima, la distribución potencial de X. nelsoni incluye también el estado de Michoacán. De esta área estimada, sólo el 1.5 % se encuentra dentro de un Área Natural Protegida. Conclusiones: Los resultados de la distribución potencial podrían ser utilizados para verificar la presencia de la especie en lugares donde no ha sido recolectada como el norte de la Reserva de la Biosfera Chamela-Cuixmala y en algunas zonas de la provincia fisiográfica Costas del Sur en el estado de Michoacán. Es necesario incrementar los muestreos en regiones poco estudiadas predichas por el modelo y aumentar el área de protección.

Abstract Introduction: The Magdalena Rat, Xenomys nelsoni, is a rodent endemic to Mexico, whose distribution is restricted to dense tropical dry forests in a small region on the Pacific coast of Mexico. It is a poorly known species categorized as "Endangered" by the International Union for Conservation of Nature (IUCN). This lack of knowledge and the high rates of deforestation of its habitat makes its conservation a priority. Objective: To summarize the historical records deposited in scientific collections, to create potential distribution maps, and to analyze the conservation status of the species. Methods: We obtained species occurrence data from literature and digital databases, analyzing them by the decade. We used GARP and MaxEnt software to generate the ecological niche models. The importance of the variables in the model was estimated using the Jackknife technique. Results: Over 129 years, 19 collectors registered 69 specimens, of which 65 are deposited in one national and seven international collections. Although the species has only been collected in Jalisco and Colima, the potential distribution for X. nelsoni also includes the state of Michoacán. Of this estimated area, only 1.5 % is in a Protected Natural Area. Conclusions: The results of the potential distribution could be used to verify the presence of the species in places where it has not been collected, such as the northern part of the Chamela-Cuixmala Biosphere Reserve and in some areas of the physiographic province Costas del Sur in the state of Michoacán. It is needed to increase samplings in the least studied regions predicted by the model and expand the area of protection.

An electric field modeling study with meta-analysis to understand the antidepressant effects of transcranial direct current stimulation (tDCS)

Objective: Transcranial direct current stimulation (tDCS) has mixed effects for major depressive disorder (MDD) symptoms, partially owing to large inter-experimental variability in tDCS protocols and their correlated induced electric fields (E-fields). We investigated whether the E-field strength of distinct tDCS parameters was associated with antidepressant effect. Methods: A meta-analysis was performed with placebo-controlled clinical trials of tDCS enrolling MDD patients. PubMed, EMBASE, and Web of Science were searched from inception to March 10, 2023. Effect sizes of tDCS protocols were correlated with E-field simulations (SimNIBS) of brain regions of interest (bilateral dorsolateral prefrontal cortex [DLPFC] and bilateral subgenual anterior cingulate cortex [sgACC]). Moderators of tDCS responses were also investigated. Results: A total of 20 studies were included (21 datasets, 1,008 patients), using 11 distinct tDCS protocols. Results revealed a moderate effect for MDD (g = 0.41, 95%CI 0.18-0.64), while cathode position and treatment strategy were found to be moderators of response. A negative association between effect size and tDCS-induced E-field magnitude was seen, with stronger E-fields in the right frontal and medial parts of the DLPFC (targeted by the cathode) leading to smaller effects. No association was found for the left DLPFC and the bilateral sgACC. An optimized tDCS protocol is proposed. Conclusions: Our results highlight the need for a standardized tDCS protocol in MDD clinical trials. Registration number: PROSPERO CRD42022296246.

Ergonomia en actividades académicas desde casa

Introducción: A consecuencia de la emergencia sanitaria por el virus SARS-CoV2, las actividades académicas migraron de forma repentina a un entorno de trabajo remoto; esto provocó que los hogares de todo el mundo se convirtieran en el asentamiento urgente de las estaciones de trabajo académico. La ergonomia como disciplina científica cobra relevancia al ser un aliado subsanador para mitigar los riesgos asociados con la aparición de lesiones musculoesqueléticas. De acuerdo con la memoria estadística del Instituto Mexicano de Seguridad Social, IMSS1, en el primer año de pandemia de COVID-19 se registraron 30 860 atenciones por lesiones en la región de manos y muñecas, 9696 en la zona de cabeza y cuello, 6251 dorsopatías y 1673 atenciones por astenopia a jóvenes de entre 18 a 29 años que desarrollaban actividades escolares. Objetivo: En este sentido, se aborda la presente investigación para conocer la composición de los espacios de trabajo académico en casa y analizar si existen factores o elementos que incidan en el riesgo de lesiones musculoesqueléticas en los estudiantes del nivel superior. Metodología: A través de un modelo de ecuaciones estructurales que cuenta con el constructo latente de las posibles lesiones (PL) en manos, espalda, piernas, cabeza, vista, oído, agotamiento físico y la respiración, las variables observables se atribuyen a los espacios utilizados para las actividades académicas en casa, muebles y equipos, Condiciones y Medio Ambiente (CyMAT). Resultados y discusión: Se encontró que un mal diseño de la estación de trabajo académico en casa, aunado a la utilización inadecuada de los muebles y equipos, aumenta la posibilidad de presentar síntomas asociados con las LMEs y, por tanto, daños en la salud del estudiante. Conclusión: La mediación de las estaciones de trabajo a través de la implementación de elementos ergonómicos mejora de forma sustancial la calidad de trabajo académico en casa, y hace evidente la importancia de la ergonomía como disciplina científica.

Introduction: As a result of the health emergency of the SARS-CoV2 virus, academic activities suddenly migrated to a remote work environment, causing homes around the world to become the urgent settlement of academic workstations. Ergonomics as a scientific discipline becomes relevant as it is a healing ally to mitigate the risks associated with the appearance of musculoskeletal injuries. According to the statistical report of the Mexican Institute of Social Security, IMSS1, in the first year of the COVID 19 pandemic, 30,860 care for injuries in the hands and wrists region, 9,696 in the head and neck area, 6,251 dorsopathies and 1,673 care for asthenopia were registered to young people between 18 and 29 years old who develop school activities. Objective: In this sense, this research is addressed to know the composition of academic workspaces at home and analyze if some factors or elements affect the risk of musculoskeletal injuries in students of the higher level. Methodology: Through a structural equations model that has the latent construct of possible injuries (PL) in the hands, back, legs, head, eyesight, hearing, physical exhaustion, and breathing; the observable variables are attributed to the spaces used for academic activities at home, furniture and equipment, conditions and environment (CyMAT) Results and discussion: It is explored that a bad design of the academic workstation at home coupled with the inappropriate use of furniture and equipment increases the possibility of presenting symptoms associated with SCI and therefore, damage to the student's health. Conclusion: The mediation of workstations through the implementation of ergonomic elements substantially improves the quality of academic work at home, making evident the importance of ergonomics as a scientific discipline

Marco legal para la prevención de procedimientos estéticos con sustancias modelantes / Legal framework for preventing aesthetic procedures with modeling substances i:en

En la actualidad, la alogenosis iatrogénica es una condición reconocida en todo el orbe, especialmente en Latinoamérica, donde es evidente la ausencia de control en la administración de sustancias no reguladas con fines estéticos, lo que ha devenido un problema emergente por la magnitud de las complicaciones, ya que algunos productos, como aceites minerales, hidrocarburos, silicona industrial, generan graves consecuencias, tanto locales como sistémicas, en el organismo. Muchos países aún no han regulado la prohibición de esta práctica, aunque cada día son más las campañas para prevenirla; sin embargo, al mismo tiempo aumenta la incidencia de la enfermedad en todo el mundo por el incremento de estos procedimientos estéticos. Al respecto, en Cuba, el creciente número de afectados por esta causa evidencia vulnerabilidad en el cumplimiento de lo establecido hasta la fecha, por lo que se impone instaurar un marco legal de estricto cumplimiento que regule la inyección de sustancias modelantes con fines estéticos.

Currently, iatrogenic allogenosis is a condition recognized throughout the world, especially in Latin America, where the absence of control in the administration of unregulated substances for aesthetic purposes is evident, which has become an emerging problem due to the magnitude of complications, since some products, such as mineral oils, hydrocarbons, industrial silicone, generate serious consequences, both local and systemic, in the body. Many countries have not yet regulated the prohibition of this practice, although every day there are more campaigns to prevent it. However, at the same time the incidence of the disease increases worldwide due to the increase in these aesthetic procedures. In this regard, in Cuba, the growing number of people affected by this cause shows vulnerability in compliance with what has been established to date, that is why it is necessary to establish a legal framework of strict compliance that regulates the injection of modeling substances for aesthetic purposes.

Nonparametric item response models: a comparison on recovering true scores / Modelos de resposta ao item não-paramétricos: comparando a recuperação de escores verdadeiros / Modelos de respuesta al item no-paramétricos: comparando la recuperación de puntuaciones verdaderas

Nonparametric procedures are used to add flexibility to models. Three nonparametric item response models have been proposed, but not directly compared: the Kernel smoothing (KS-IRT); the Davidian-Curve (DC-IRT); and the Bayesian semiparametric Rasch model (SP-Rasch). The main aim of the present study is to compare the performance of these procedures in recovering simulated true scores, using sum scores as benchmarks. The secondary aim is to compare their performances in terms of practical equivalence with real data. Overall, the results show that, apart from the DC-IRT, which is the model that performs the worse, all the other models give results quite similar to those when sum scores are used. These results are followed by a discussion with practical implications and recommendations for future studies.(AU)

Procedimentos não paramétricos são usados para adicionar flexibilidade aos modelos. Três modelos não paramétricos de resposta ao item foram propostos, mas não comparados diretamente: o Kernel smoothing (KS-IRT); a Curva Davidiana (DC-IRT); e o modelo semiparamétrico Rasch Bayesiano (SP-Rasch). O objetivo principal do presente estudo é comparar o desempenho desses procedimentos na recuperação de escores verdadeiros simulados, utilizando escores de soma como benchmarks. O objetivo secundário é comparar seus desempenhos em termos de equivalência prática com dados reais. De forma geral, os resultados mostram que, além do DC-IRT, que é o modelo que apresenta o pior desempenho, todos os outros modelos apresentam resultados bastante semelhantes aos de quando se usam somatórios. Esses resultados são seguidos de uma discussão com implicações práticas e recomendações para estudos futuros.(AU)

Se utilizan procedimientos no paramétricos para agregar flexibilidad a los modelos. Se propusieron tres modelos de respuesta al ítem no paramétricos, pero no se compararon directamente: Kernel smoothing (KS-IRT); la curva davidiana (DC-IRT); y el modelo bayesiano de Rasch semiparamétrico (SP-Rasch). El objetivo principal del presente estudio es comparar el desempeño de estos procedimientos en la recuperación de puntajes verdaderos simulados, utilizando puntajes de suma como puntos de referencia. El objetivo secundario es comparar su desempeño en términos de equivalencia práctica con datos reales. En general, los resultados muestran que, a excepción de DC-IRT, que es el modelo con peor desempeño, todos los otros modelos presentan resultados bastante similares a los obtenidos cuando se utilizan sumatorios. Estos resultados son seguidos por una discusión con implicaciones prácticas y recomendaciones para estudios futuros.(AU)

A STUDY ON FINANCIAL MODELING USING 3 STATEMENT MODEL AND DCF VALUATION: AN INSIGHT FOR NEW ENTREPRENEURS

Financial statements reect the position of a company in respect of its wealth and protability in its short- term and long-term existence. The company's result in terms of protability is reected in the Prot and Loss statement for a nancial year. The Long term nancial health of the company in terms of its wealth creation will be reected in its Financial Position Statement, termed as a Balance sheet reecting its assets and liability position throughout its existence. Various nancial modelling techniques are used to predict the future of a company. The 3-statement model predicts the company's nancial strength for the future regarding the Balance sheet, prot and Loss Account and Cash ow statement. The study aims to predict the nancial statements for a future period of 5 years based on the company's past performance. The study was based on the nancial performance of Siemens AG for the past ve years, and it attempts to predict the future 5 years of the company under study.

Green Products Purchase Intention in Chilean Consumers: Comparing Three Models Using Structural Equations / Intención de Compra de Productos Ecológicos en Consumidores Chilenos: Comparación de Tres Modelos por Ecuaciones Estructurales

Abstract The objective of this study was to compare three models: the theory of reasoned action (TRA), the theory of planned behavior (TPB), and its extended form (ETPB), to predict the intention of Chilean consumers for purchasing green products. Five hundred people were surveyed, establishing an inter-rater reliability analysis, and a discriminant, convergent and construct validity using three structural equation models (SEM). The results showed that the ETPB model is useful to explain the consumption behavior intention for green products based on a triple bottom line, whose main contribution is the indirect effect of EC on the model. The study found that of the three variables, PBC was the strongest predictor of purchase intention, followed by attitude. In conclusion, both the ETPB model and the green products purchase intention instrument contribute to broaden the studies about consumer behavior in sustainable marketing in Chile.

Resumen El objetivo del presente estudio fue comparar los modelos de teoría de acción razonada (TAR), teoría de comportamiento planificado (TCP) y su forma extendida (TCPE), para predecir la intención de compra de productos ecológicos en consumidores chilenos. Se encuestaron 500 personas y se estableció un análisis de fiabilidad interjuez, validez discriminante, convergente y de constructo a través de modelos de ecuaciones estructurales (SEM). Los resultados señalan que el modelo TCPE es útil para explicar la intención de comportamiento de consumo ante productos verdes con base en una triple línea de fondo, cuya principal contribución es el efecto indirecto de PA sobre el modelo. De las tres variables, se evidencia que el CCP era la predictora más fuerte de la intención de compra, seguida de la actitud. En conclusión, tanto el modelo TCPE como el instrumento de intención de compra de productos verdes contribuyen a la ampliación de estudios sobre el comportamiento del consumidor en marketing sustentable en Chile.

Modelado matemático del efecto de las medidas de cuidado por COVID-19 sobre otras enfermedades respiratorias / Mathematical modelling of the impact of COVID-19 care measures on other respiratory diseases

RESUMEN INTRODUCCIÓN Los modelos matemáticos de la transmisión de enfermedades infecciosas permiten estudiar distintos mecanismos que afectan su comportamiento temporal. Este trabajo analizó el efecto sobre la dinámica de la influenza y el virus sincitial respiratorio (VSR) de la disminución de la transmisibilidad debida a las medidas de cuidado adoptadas para reducir la circulación de COVID-19. MÉTODOS Se empleó un modelo determinista tipo SIRS (susceptible-infectado-recuperado-susceptible) con modulación estacional para representar la influenza y el VSR, en ambos casos con inmunidad de corta duración y ciclo anual. Los cambios en la transmisibilidad de la enfermedad se modelaron reduciéndola durante dos años y planteando distintos escenarios. RESULTADOS En el modelo planteado, la reducción en la transmisibilidad genera cambios que se sostienen en los años siguientes: eventos epidémicos muy pronunciados con alargamiento del intervalo interbrote. Este efecto resulta dominante respecto del comportamiento estacional. El escenario de una reducción inicial de la transmisibilidad del 40% resulta compatible con el comportamiento de influenza y VSR reportados actualmente para Argentina. DISCUSIÓN El modelo general propuesto, en condiciones de disminución transitoria en la transmisibilidad, exhibe una epidemiología compatible con la observada recientemente en Argentina para ambas enfermedades e ilustra el modelado como herramienta útil en la comprensión de efectos no intuitivos.

ABSTRACT INTRODUCTION Mathematical models of infectious diseases transmission allow to study different mechanisms which affect their temporal behavior. This work analyzed the impact of the decrease in transmissibility, as a result of measures of personal care adopted to reduce circulation of COVID-19, on the dynamics of influenza and respiratory syncytial virus (RSV). METHODS A deterministic SIRS (susceptible-infected-recovered-susceptible) model with seasonal modulation was used to represent two diseases with short-term immunity and annual cycle: influenza and RSV. Changes in disease transmissibility were modeled by reducing it for two years and analyzing different scenarios. RESULTS In the proposed model, transmissibility reduction brings changes which sustain in the following years: very pronounced epidemic events with lengthening of the inter-outbreak interval. This effect prevails over the seasonal behavior. The scenario of 40% initial reduction in transmissibility is compatible with the behavior of influenza and RSV currently reported in Argentina. DISCUSSION The general model proposed here, under conditions of temporary reduced transmissibility, shows an epidemiology compatible with recently reported data of influenza and RSV in Argentina. This result illustrates modeling as a useful tool to understand non-intuitive effects.

El efecto de la poda de Acropora palmata como estrategia para la obtención de tejido vivo en acciones de restauración arrecifal

Introducción: Los arrecifes de coral son ecosistemas altamente degradados, por lo que ha sido necesario implementar acciones de restauración activa para recuperar su estructura y funcionamiento. Se ha implementado la propagación clonal para obtener fragmentos pequeños (~ 10 cm) de las ramas distales de colonias donadoras de corales de la especie Acropora palmata, para posteriormente fijarlos en el sustrato arrecifal, simulando el efecto de dispersión que ocurre de manera natural en esta especie, a lo que en este trabajo se denomina ''dispersión asistida". Sin embargo, es necesario evaluar los efectos de esta técnica como son: la cantidad de fragmentos que se puede obtener de cada colonia, el periodo de recuperación de tejido de las colonias donadoras y los fragmentos sembrados. Objetivo: Evaluar el efecto de poda en las colonias donadoras estimando el porcentaje de tejido podado de colonias donadoras de A. palmata y su tasa de recuperación 30 meses después. Métodos: Se realizaron cuatro monitoreos: antes, inmediatamente después de la poda, un mes después de la siembra, y 30 meses después, en cuatro colonias de A. palmata localizadas en el Parque Nacional Costa Occidental de Isla Mujeres, Punta Cancún y Punta Nizuc en el Caribe mexicano. La modelación 3D basada en fotogrametría se realizó con el software Agisoft Metashape Pro, mientras que las métricas de área de superficie de tejido, extensión radial y apical se obtuvieron mediante el software CloudCompare. Resultados: Posterior a la colecta de fragmentos de las colonias, se observó que el material utilizado en la dispersión asistida representa menos del 12% del tejido vivo. Después de un mes, las colonias donadoras presentaban una recuperación del 5% con tejido nuevo recubriendo las áreas de corte. Las colonias donadoras perdieron, en promedio, 65% de tejido vivo tras el impacto de cuatro huracanes, y en un caso la colonia fue totalmente eliminada, pero con los fragmentos sembrados se pudo conservar el genotipo. Conclusiones: La dispersión asistida podría incrementar el tejido vivo de corales ramificados en intervalos de tiempo relativamente cortos, sin comprometer la integridad de la colonia donadora, si se poda menos del 12%.

Introduction: Coral reefs are highly degraded ecosystems, for which it has been necessary to implement active restoration actions to recover their structure and functioning. Asexual propagation has been implemented to obtain small fragments (~10 cm) from the distal branches of donor colonies of corals of the species Acropora palmata, to subsequently relocate them in the reef substrate, simulating the dispersion effect that occurs naturally in the species, which in this work is called assisted propagation. However, it is necessary to evaluate the effects of this technique, such as the number of fragments that can be obtained from each colony, the tissue recovery period of the donor colonies and fragments. Objective: To address the effect of pruning on donor colonies by estimating the percentage of live tissue removed from donor colonies of A. palmata and their recovery rate after 30-months. Methods: Four surveys were carried out: before, immediately after pruning, one month after outplanting, and 30 months after pruning on four colonies of A. palmata located in the Parque Nacional Costa Occidental de Isla Mujeres, Punta Cancún and Punta Nizuc in the Mexican Caribbean. Photogrammetry-based 3D modeling was performed using Agisoft Metashape Pro software, while tissue surface area, radial and apical growth were obtained using CloudCompare software. Results: After fragment collection, the material used in the assisted propagation represents less than 12% of the living tissue. After one month, the donor colonies showed a recovery of 5%, with new tissue covering the cut areas. The donor colonies lost on average 65 % of living tissue after four hurricanes, and in one case the colony was lost all together, but with the outplanted fragments the genotype could be preserved. Conclusions: Assisted propagation could increase living tissue of branching corals in relatively short intervals of time, without serious damage to the donor colony if less than 12 % is removed.

Analysis of influencing factors of caregiver preparedness at discharge of patients with chronic heart failure based on the individual and family self-management theory / 中国实用护理杂志

Objective:A structural equation model of the influencing factors on caregiver preparedness at discharge of patients with chronic heart failure was constructed based on the individual and family self-management theory, and the main paths influencing caregiver preparedness were explored.Methods:This study was a cross-sectional survey. A total of 345 caregivers of patients with chronic heart failure who were hospitalized in the Fourth Affiliated Hospital of China Medical University from October 2020 to August 2021 were selected as research objects by convenience sampling method, and they were investigated by Caregiver Preparedness Scale, Family APGAR Index, Herth Hope Index, Social Support-Rating Scale, Simplified Coping Style Questionnaire. The influencing factors on caregiver preparedness at discharge of patients with chronic heart failure were analyzed.Results:The total score of Caregiver Preparedness Scale, Family APGAR Index, Herth Hope Index, Social Support-Rating Scale, and Positive and Negative Coping Subscale of Simplified Coping Style Questionnaire in patients with chronic heart failure was (20.79 ± 4.92), (8.05 ± 1.43), (35.34 ± 4.47), (43.89 ± 6.56), (24.38 ± 5.21), (11.21 ± 4.26) points. Caregiver preparedness in patients with chronic heart failure was positively correlated with family function, hope, positive coping and social support ( r values were 0.213-0.383, all P<0.01), and negatively correlated with negative coping ( r=-0.546, P<0.01). Family function and social support in patients with chronic heart failure could directly or indirectly affect caregiver preparedness (total effect value: 0.380, 0.212), hope and negative coping directly affected caregiver preparedness (total effect value: 0.200, -0.433), and could account for 39% of the total variation in caregiver preparedness. Conclusions:Caregiver preparedness of patients with chronic heart failure needs further improvement. The effective ways to improve caregiver preparedness are to pay attention to family function, improve hope level, increase social support and reduce negative coping.

Biomechanical Characteristics Analysis of Human-Machine Coupling on Ankle / 医用生物力学

Objective A 2-PSU/ RR parallel ankle rehabilitation robot was designed, and the biomechanical properties of human muscles were also analyzed, so as to study rehabilitation strategy of the ankle rehabilitation robot. Methods The actual workspace of the robot was obtained by numerical discrete search method, and the effect of structural parameter changes on the height of robot moving platform was explored. Then the human biomechanical responses such as muscle force and muscle mobility were obtained by human biomechanical simulation software AnyBody, so as to investigate the effect of moving platform height changes on muscle behavior. Results The robot could meet the demand of ankle plantarflexion/ dorsiflexion and inversion/ eversion motion. Appropriately increasing the initial inclination angle and decreasing the length of the fixed-length bar enabled the ankle rehabilitation robot to have a lower overall height. The height of the moving platform was decreased by 10 mm in turn, and the muscle force and muscle activity of the human body involved in the movement were decreased to a certain extent. Conclusions This study provides a new design solution for ankle rehabilitation, offers theoretical guidance for motion analysis of the ankle rehabilitation robot, and accelerates rehabilitation of the patients’ ankles by modifying the mechanism parameters.

The Action Effect of Two Kinds of Lumbar Massage Obliquity Manipulation with Different Lumbar Degeneration Degrees: A Comparative Study / 医用生物力学

Objective To compare the action effect of traditional and modified lumbar massage obliquity manipulation with different degrees of lumbar degeneration. Methods The biomechanical model of quality-spring-damping system lumbar spine was established and massage forces from professional massage doctors were collected. The force was used as input of the model, and lumbar degeneration was simulated by increasing elastic coefficient of the spring and damping coefficient of the damping in the model. By using MATLAB/ Simulink simulation technology, the effects of massage obliquity manipulation ( the maximum relative displacement and maximum acceleration) with different degrees of lumbar degeneration were obtained for comparative analysis.Results When the lumbar spine was degenerative, the maximum relative displacement and maximum acceleration of each segment were obtained under two manipulations. With the increase of lumbar degenerationdegree, the maximum relative displacement and maximum acceleration of each segment under two manipulations showed a downward trend, and the attenuation rate of the maximum relative displacement and maximum acceleration of each segment under two manipulations was obtained. Conclusions When degenerative changes in the spine do not occur, the effectiveness of traditional lumbar massage obliquity manipulation is slightly better than that of modified lumbar massage obliquity manipulation, but the safety of modified lumbar massage obliquity manipulation is obviously better than that of the traditional lumbar massage obliquity manipulation, so the modified lumbar massage obliquity manipulation should be used. With the aggravation of lumbar degeneration, the action effects of two manipulations are attenuated in a power function. The attenuation rate of effectiveness of modified lumbar massage obliquity manipulation is significantly faster than that of traditional lumbar massage obliquity manipulation, indicating that the modified lumbar massage obliquity manipulation should not be used in the caseof lumbar degeneration.

Physiological pharmacokinetic model of children and its application of modeling software / 药学学报

Developmental changes in children can affect drug disposition and clinical effects. A physiologically-based pharmacokinetic (PBPK) model is a mathematical model that can be used to predict blood drug concentrations in children and gain insight into age-dependent physiological differences in drug disposition impact. Pediatric PBPK (P-PBPK) models have attracted attention over the past decade. With the concerted efforts of academia, pharmaceutical companies, and regulatory agencies, there are more and more examples of pediatric clinical studies using PBPK models. Nevertheless, the number of P-PBPK models and their predictive performance still lag behind adult models. By referring to the literature, we study the process of children adapting to adult absorption, distribution, metabolism, and excretion (ADME) parameters and analyze the general principles of P-PBPK model establishment. In addition, we summarize the functions and application examples of commonly used P-PBPK modeling software to provide a basis for the rational application of modeling software.

Modeling human pregastrulation development by 3D culture of blastoids generated from primed-to-naïve transitioning intermediates

Human pluripotent stem cells provide an inexhaustible model to study human embryogenesis in vitro. Recent studies have provided diverse models to generate human blastoids by self-organization of different pluripotent stem cells or somatic reprogramming intermediates. However, whether blastoids can be generated from other cell types or whether they can recapitulate postimplantation development in vitro is unknown. Here, we develop a strategy to generate human blastoids from heterogeneous intermediates with epiblast, trophectoderm, and primitive endoderm signatures of the primed-to-naïve conversion process, which resemble natural blastocysts in morphological architecture, composition of cell lineages, transcriptome, and lineage differentiation potential. In addition, these blastoids reflect many features of human peri-implantation and pregastrulation development when further cultured in an in vitro 3D culture system. In summary, our study provides an alternative strategy to generate human blastoids and offers insights into human early embryogenesis by modeling peri- and postimplantation development in vitro.

Challenges and Perspectives in Target Identification and Mechanism Illustration for Chinese Medicine / 中国结合医学杂志

Chinese medicine (CM) is an important resource for human life understanding and discovery of drugs. However, due to the unclear pharmacological mechanism caused by unclear target, research and international promotion of many active components have made little progress in the past decades of years. CM is mainly composed of multi-ingredients with multi-targets. The identification of targets of multiple active components and the weight analysis of multiple targets in a specific pathological environment, that is, the determination of the most important target is the main obstacle to the mechanism clarification and thus hinders its internationalization. In this review, the main approach to target identification and network pharmacology were summarized. And BIBm (Bayesian inference modeling), a powerful method for drug target identification and key pathway determination was introduced. We aim to provide a new scientific basis and ideas for the development and international promotion of new drugs based on CM.

Research progress and maturity assessment of continuous manufacturing of traditional Chinese medicine / 中国中药杂志

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.

Experimental study of improved sclerotherapy injection in rat model of vertebral arteriocervical spondylopathy / 中国骨伤

OBJECTIVE@#To improve the rat model of cervical spondylosis of vertebral artery type (CSA) induced by injecting sclerosing agent. To evaluate the efficacy of injecting sclerosing agent to induce CSA.@*METHODS@#Forty Health SPF SD rats(20 males and 20 females), were randomly divided into two groups:the model group (20) and the blank group (20). All the animals were followed up for 4 weeks for the observation of general situation, transcranial Doppler(TCD) detection of blood flow velocity, pulsatility index and resistive index of the vertebral artery, measurement of mental distress by open-field test.@*RESULTS@#One to two days after establish the animal model, rats in the model group appeared apathetic with decreased autonomic activities, trembling, squinting, increased eye excrement, etc., and no rats died during the experiment. The mean blood flow velocity of the model group was lower than that of the blank group (P<0.05), and the pulsatilit index and resistive index of the model group were higher than that of the blank group (P<0.05). The mental distress of the model group was significantly higher than that of the blank group.@*CONCLUSION@#The modified injection of sclerosing agent is a practical method to establish the rat model of CSA, with high success rate, high stability, low mortality and simple operation.

Methodology and application of process analytical technology (PAT) for traditional Chinese medicine manufacturing:a review / 中国中药杂志

Owing to the advancement in pharmaceutical technology, traditional Chinese medicine industry has seen rapid development. Preferring conventional manufacturing mode, pharmaceutical enterprises of traditional Chinese medicine have no effective process detection tools and process control methods. As a result, the quality of the final products mainly depends on testing and the quality is inconsistent in the same batch. Process analytical technology(PAT) for traditional Chinese medicine manufacturing, as one of the key advanced manufacturing techniques, can break through the bottleneck in quality control of medicine manufacturing, thus improving the production efficiency and product quality and reducing the material and energy consumption. It is applicable to the process control and real-time release of advanced manufacturing modes such as intelligent manufacturing and continuous manufacturing. This paper summarized the general idea of PAT for traditional Chinese medicine manufacturing. Through the analysis of the characteristics and status quo of the technology, we summed up the methodology for the continuous application and improvement of PAT during the whole life-cycle of traditional Chinese medicine. The five key procedures(process understanding, process detection, process modeling, process control, and continuous improvement) were summarized, and the application was reviewed. Finally, we proposed suggestions for the technical and regulatory challenges in implementing PAT in traditional Chinese medicine industry. This paper aims to provide a reference for development and application of PAT in advanced manufacturing, intelligent manufacturing, and continuous manufacturing of traditional Chinese medicine industry.